Quick answer: The Vomitoxin Rapid Quantitative Test Strip measures DON in wheat, barley, oats and feed after extraction, giving a quantitative presumptive result in minutes before LC-MS/MS confirmation.
Key takeaways
- Vomitoxin (DON) is a Fusarium mycotoxin common in wheat, oats and maize.
- The EU sets maximum levels for cereals and cereal products; the US FDA publishes advisory levels.
- Quantitative strips support receiving decisions and supplier trends.
- Confirm positives and borderline results by LC-MS/MS.
Why vomitoxin testing matters
Deoxynivalenol causes feed refusal, vomiting and reduced performance in livestock, and it is regulated in many markets. Wheat, barley, oats and maize are the main risk commodities, especially in cool, wet growing seasons. A positive lot can be rejected at the border or by the buyer.
What the strip detects
The strip uses a competitive immunoassay with a quantitative reader. DON in the extract competes with a fixed antigen on the test line, and the reader calculates the concentration. The result is a screening value, not a regulatory certificate; confirm near-limit and positive results by LC-MS/MS.
US and EU rules at a glance
The EU sets maximum levels for DON in unprocessed cereals, flour, bread, pasta and other products under Regulation (EU) 2023/915. The US FDA publishes advisory levels for finished wheat products and guidance for feed. These are not legal tolerances, but buyers often apply them as specifications.
How to use the strip
- Take multiple increments and grind the composite.
- Extract and dilute per the insert.
- Apply the extract and read with the reader.
- Confirm positives and borderline results by LC-MS/MS.
Common mistakes
Using a single probe, inconsistent extraction and late reading are frequent errors. Another is relying on a screen for a regulatory decision. Run controls, document kit lot and result, and review trends by origin and harvest year.
| Specification |
Detail |
| Sample |
Wheat, barley, oats, feed |
| Format |
Quantitative strip with reader |
| Result time |
Minutes after extraction |
| Storage |
Room temperature, dry |
| Confirmation |
LC-MS/MS |
Sampling and storage
DON contamination can be uneven, especially in grain with fusarium damage. Take multiple increments, quarter the composite and grind it finely. Record the harvest year, origin and storage history. Keep grain dry and ventilated, and retain a sample until the lot is released.
Documentation for buyers
Keep the sample ID, kit lot, result and disposition together. If a lot is held, record the LC-MS/MS confirmation and corrective action. Buyers increasingly ask for lot-level evidence during supplier approval and audits.
When to confirm by laboratory
Confirm positives and borderline results, and verify a subset of negatives. Review trends by origin and season to adjust testing frequency.
Field-to-storage checklist
Record the field, harvest date and weather. Dry grain promptly, clean equipment between lots and keep storage ventilated. Inspect for mould, insects and moisture before shipment, and sample the stored lot again before loading because conditions can change.
Key questions for suppliers
Ask for the harvest year, moisture record, storage history and previous DON results. Confirm the sampling method and laboratory used, and review trends rather than a single certificate.
Bottom line
DON risk is driven by weather and storage. Combine representative sampling, rapid screening and laboratory confirmation to protect wheat and oat shipments.
Quick facts
DON is a Fusarium mycotoxin, the EU sets maximum levels, the US publishes advisory levels, and LC-MS/MS confirms positive screens. Sampling is the biggest factor in a reliable result.
Important note
Rapid test results are screening information. Confirm any positive or borderline result with an accredited laboratory or veterinary method before making a regulatory, export or treatment decision. Specifications and kit performance can change; always use the current instructions and certificate of analysis supplied with the lot.
Handling and storage
Store the kit at room temperature in a dry place, keep the pouch sealed until use, equilibrate to room temperature before testing and do not use expired devices. Use the buffer and swabs supplied with the kit, follow the reading time exactly and record the kit lot and expiry date in the test record.
Frequently asked questions
What is the EU DON limit?
Limits are product-specific in Regulation (EU) 2023/915; check unprocessed cereals, flour and finished products.
Does the US have a DON limit?
The FDA publishes advisory levels for finished wheat products and feed; they are not legal tolerances.
Can a rapid test replace LC-MS/MS?
No, it is a screening tool; confirmation is required for official decisions.
Sources and further reading
Ordering and technical support
Conlight supplies this test with OEM/ODM options and export documentation for US and EU buyers. Contact the team for a quote, validation data, matrix guidance and the current certificate of analysis. Confirm the final specifications and regulatory limits for your destination market before ordering.
Explore the food safety testing range.
view
detail